Acrosser AR-R6000 - Manual (Page 7)

Revision: 1.1
2. Procedure of Assembly/Disassembly
2.1. Installing the 2.5”Hard Disk Drive (HDD) and CF card
The following are step-by-step installation
1. Remove the power cord out from the AR-R6000
2. Unscrew the two screws to release top cover of AR-R6000, as shown in Fig-01.
Push(Open) Push(Open)
Unscrew
Unscrew
Fig- 01 Remove the top cover
3. Install HDD into HDD bracket and lock HDD body and bracket by screws (3.5”HDD : 6pcs ,
2.5”HDD : 4pcs), as shown in Fig-02-1 & Fig-02-2
Fig-02-1 HDD bracket with HDD body Fig-02-2 HDD bracket with HDD body
7