Acrosser AR-R6000 - Manual (Page 23)

Revision: 1.0
3.2.2.3. Jumper Setting and Pin definition
Item JUMPER NAME DEFAULT DESCRIPTION
J1
CLRTC 1-2 CLR CMOS
NORMAL (Default)
2-3 CLR CMOS
J2
GPIOVS
1-2 GPIO Voltage selection
1-2 +V5 (Default)
2-3 +V3.3
J3
BP_SEL 2-3 Bypass selection
1-2 Bypass
2-3 NORMAL (Default)
J4
PSON 2-3 ATX / AT Mode
2-3 AT Mode (Default)
3.2.2.4 DIP Switch Setting
Item SWITCH NAME DEFAULT DESCRIPTION
SW2
All ON CPLD setting
23