Acrosser AR-B5630 - Manual (Page 24)

Revision: 2.0
24
3.5 Peripherals Setup
This option controls the configuration of the board’s chipset. Control keys for this screen are the
same as for the previous screen.
Option Choice Description
Onboard Serial Port 1
Onboard Serial Port 2
Onboard Serial Port 3
Onboard Serial Port 4 Serial Port 1: 3F8 / IRQ11
Serial Port 2: 2F8 / IRQ10
Serial Port 3: 3E8 / IRQ9
Serial Port 4: 2e8 / IRQ8
Select an address and the corresponding
interrupt for each serial port.
USB Device Setting
Enabled
Disabled
Select Enabled if your system contains
a Universal Serial Bus (USB) 2.0
controller and you have USB
peripherals
On chip IDE DEVICE
The integrated peripheral controller
contains an IDE interface with support for
two IDE channels. Select Enabled to
activate each channel separately.