3DLABS Oxygen GVX420 - Manual (Page 24)

Software Configuration
3Dlabs Oxygen GVX420 User's Guide 14
Configuring your Oxygen GVX420 Card for Stereo Configuring your Oxygen GVX420 Card for Stereo Configuring your Oxygen GVX420 Card for Stereo Configuring your Oxygen GVX420 Card for Stereo Viewing Viewing Viewing Viewing
The Oxygen GVX420 card supports 3D stereo viewing. This requires that the appropriate equipment such as
stereo glasses be connected to the 3-pin miniature DIN connector on the Oxygen GVX420 card. It is
recommended that you use a monitor with a screen refresh frequency of at least 100 Hertz.
In addition, it is recommended that you turn off fluorescent lighting before viewing stereo images to prevent a
possible headache.
To set up and configure stereo viewing
1. Connect the stereo hardware to the round, stereo connector on the Oxygen GVX420 card. See the
documentation that came with your stereo hardware.
2. In the Display Properties Control Panel, click the 3Dlabs tab.
3. In the 3Dlabs Display Properties screen, click Advanced.
Note: This is only an example. Your own panel displays the
information specific to your board, BIOS, and driver version.
4. Click the OpenGL Support tab.