Datamax E-3202 - Manual (Page 29)

E-3202/Cash Drawer Printer 21
5. If the communication settings are correct press No. If they are not
correct press Yes and modify them by pressing Yes to accept the
setting and No to change it.
6. When the desired communication settings are chosen press Yes to
enter the emulation menu.
7. You are now in the emulation menu. Press Yes to print the current
setting.
8. Press No to change to ESC/POS. (If ESC/POS is already printed
press Yes). Press Yes to enter the next section.
9. If no more changes are required press No until the end, and then
press Yes to save your changes.
10. Your printer is now configured to work with your PC. You can use
your favorite text editor to create your printouts.
4.6 Changing the Default Settings
Your printer is shipped with the following standard configuration:
Communication Parameters Emulation Character Sets
Speed: 9600 baud ESC/POS Code page: 850
Data: 8 bits Width: 12x24
Parity: None Country: USA
Control: Hardware
Page Media Other
Line spacing: 6 lpi Media: Paper Auto LF: Off
Auto CR: Off
Contrast (20%): +00%
Contrast (5%): +00%