Durst Theta 76 - Manual (Page 7)

If you want to make it even more easy for
yourself in handling the Theta 76, then you
should decide right away for the external
automatic cutter/sorter station. Here, the
auto nesting software arranges all images
in strips whereby all print sizes are
produced on the largest media roll,
resulting in maximum flexibility and
productivity. And after processing, the
cutter&sorter station cuts single images
and sorts them to orders. You profit from
the simplicity of operation which comes
close to a minilab, because you receive
ready cut and according to the order
sorted pictures.
For even larger sizes there is a larger
Y-cutter 50 available, that can cut sizes
up to 50 x 70 cm (20 x 30 in.)
The 100 % light tight and wheel mounted
paper cassette can be easily loaded from
the front side of the imager. The cassette
allows full daylight use and accepts media
roll widths from 20.3 cm (8 in.) up to
76.2 cm (30 in.) at a max. length of
175 m (530 ft.). For printing, the paper is
transported out of the cassette and in
case of a cassette or material change
pulled completely back into the cassette.
Using this technique unnecessary material
loss is avoided.
Designed for RA4 and compatible
processes, our roller transport paper
processor is directly connected to the
Theta 76 imager. It can be operated as
desired with either chemical or flowing
wash. The processor contains everything
that you expect from a professional device:
integrated bath replenishment and bath
heating, bath level monitoring and a high
performance IR dryer. The processor runs
with a transport speed of 52 meters
(170 ft.) per hour.
The paper cassette:
functional and practical.
Facts of the RA4 paper
processor
Can it be anymore
comfortable?