Directed Electronics PYTHON 480XP - Manual (Page 23)

© 2002 Directed Electronics, Inc.
23
System Features Menus
Menu #1 - Basic Features
Items in bold text have been programmed to the default setting at the factory.
Menu #2 - Remote Start Features
Feature Default LED ON Setting LED OFF Setting
Number (Press Channel 1) (Press Channel 2)
2-1 Engine Checking ON Engine Checking OFF
2-2 Tachometer checking type Voltage checking type
2-3 12 minutes run time 24 minutes, 60 minutes run time
2-4 Flashing parking light output Constant parking light output
2-5 Cranking time 0.6 sec. (1)* Cranking time - 0.8 (2), 1.0 (3), 1.2 (4),
1.4 (5), 1.6 (6), 1.8 (7), 2.0 (8), 4.0 (9)*
2-6 High voltage check level Low voltage check level
2-7 Auxiliary output - factory disarm Auxilliary output - special accessory
2-8 Normal status output Factory rearm output
2-9 Anti-grind ON Anti-grind OFF
* NOTE: The numbers in parentheses indicate the number of times the LED will flash.
Feature Default LED ON Setting LED OFF Setting
Number (Press Channel 1) (Press Channel 2)
1-1 Active arming Passive arming
1-2 Chirps ON Chirps OFF
1-3 Ignition controlled door locks ON Ignition controlled door locks OFF
1-4 Active locking only Passive locking
1-5 0.8 second door lock pulses 3.5 second door lock pulses
1-6 Double pulse unlock OFF Double pulse unlock ON
1-7 Channel 2 output - delayed validity (1)* Channel 2 output - Instant validity
(2)/latched (3)/latched reset with
ignition (4)/30-second timed (5)/
second unlock (6)*
1-8 Factory disarm with Channel 2 ON Factory disarm with Channel 2 OFF
1-9 Code Hopping ON Code Hopping OFF
* NOTE: The numbers in parentheses indicate the number of times the LED will flash.