Q-See Q25DVR4ES - Manual (Page 13)

Q-See Q25DVR4ES User’s Manual
Page 13
HDD FORMAT:
If you format the hard drive, it will erase all the data on the hard drive.
Note: When you install a new hard drive in the DVR, please use this function to
format the hard drive.
Chapter 5: DVR Setup - 5.12 Sub Menu-Time Set
To configure the DVR’s time:
Press [ Up] and [ Down] to move
prompt.
Press [ Select] to modify.
Press [
Menu] to save and exit.
Chapter 5: DVR Setup - 5.13 Hard Disk Setup
OVERWRITE ENABLED:
If you choose YES, recording continues and
overwrites previous recordings when the hard
drive is full. If you choose NO, the recording
process stops when the hard drive is full.
HDD SIZE: This shows the size of the hard
drive installed in the DVR.
HDD USED: This shows the space used up
on the master hard drive and the percentage
of hard drive space being used.
TIME SET
∨ ∨ ∨ ∨
2008/08/08 20:08:08
PRESS (UP,DOWN), ENTER (SELECT)
PRESS (MENU) TO EXIT
HARD DISK SETUP
OVERWRITE ENABLED [YES]
HDD SIZE 120042MB
HDD USED 80865MB 77%
HDD FORMAT
PRESS (UP, DOWN), ENTER (SELECT)
PRESS (MENU) TO EXIT