beautypg.com

License lamp – Dodge CHARGER 2010 User Manual

Page 420

background image

11. Reinstall the taillamp assembly, fasteners, electrical
connector, and trunk liner.

12. Close the trunk.

License Lamp

1. Remove the screws securing the lamp to the rear
fascia.

2. Remove the bulb and socket assembly.

3. Disconnect the bulb from the socket assembly and
install the replacement bulb.

4. Reinstall the bulb and socket assembly.

5. Reattach the lamp to the rear fascia, and then install
the screws.

1 — License Lamp Bulb
2 — Socket

7

MAINTAINING YOUR VEHICLE

419