beautypg.com

Wheel cover or center cap installation, If equipped – Dodge CHARGER 2010 User Manual

Page 356

background image

Wheel Cover or Center Cap Installation — If
Equipped

NOTE:

Do not attempt to install a center cap or wheel

cover on the compact spare.

1. Mount the road tire on the axle. For vehicles equipped
with wheel covers, perform Steps 2 and 3. For vehicles
equipped with center caps, proceed to Step 4.

2. Install two lug nuts on the mounting studs, which are
on each side of the stud that is in alignment with the
valve stem. Install the lug nuts with the cone shaped end
of the nut toward the wheel. Lightly tighten the lug nuts.
To avoid the risk of forcing the vehicle off the jack, do not
tighten the lug nuts fully until the vehicle is lowered to
the ground.

Tire and Wheel Cover Or Center Cap

1 — Valve Stem

4 — Wheel Cover

2 — Valve Notch

5 — Mounting Stud

3 — Wheel Lug Nut

6

WHAT TO DO IN EMERGENCIES

355