5 where do i go from here, 1 real-time clock, 2 technical support – Digi JACKRABBIT BL1800 User Manual
Page 18: 1 real-time clock 2.5.2 technical support
14
Jackrabbit (BL1800)
2.5 Where Do I Go From Here?
If everything appears to be working, we recommend the following sequence of action:
1. Run all of the sample programs described in Section 4.2 to get a basic familiarity with
Dynamic C and the Jackrabbit’s capabilities.
2. For further development, refer to this Jackrabbit (BL1800) User’s Manual for details
of the board’s hardware components.
A documentation icon should have been installed on your workstation’s desktop; click
on it to reach the documentation menu. You can create a new desktop icon that points to
default.htm
in the
docs
folder in the Dynamic C installation folder.
3. For advanced development topics, refer to the Dynamic C User’s Manual, also in the
online documentation set.
2.5.1 Real-Time Clock
If you plan to use the real-time clock functionality in your application, you will need to set
the real-time clock. You may set the real-time clock using the
SETRTCKB.C
sample pro-
gram from the Dynamic C
SAMPLES\RTCLOCK
folder. The
RTC_TEST.C
sample pro-
gram in the Dynamic C
SAMPLES\RTCLOCK
folder provides additional examples of how
to read and set the real-time clock
2.5.2 Technical Support
NOTE: If you purchased your Jackrabbit through a distributor or through a Rabbit partner,
contact the distributor or partner first for technical support.
If there are any problems at this point:
•
Use the Dynamic C
Help
menu to get further assistance with Dynamic C.
•
Check the Rabbit Technical Bulletin Board and forums at
and at
.
•
Use the Technical Support e-
.