Directed Electronics 2000 - Manual (Page 20)

17
© 2001 Directed Electronics, Inc.
Programming Options
Programming options control what your system does during
normal operation, and require few or no additional parts. However,
some programming options may require additional installation
labor.
The following is a list of the program settings, with the factory
settings in Bold:
■ Active arming (only with the transmitter) or passive arming
(automatic arming 30 seconds after the ignition is turned
off).
■ Arming/disarming confirmation siren chirps on or off.
■ Siren duration can be programmed for either 30 or 60
seconds.
■ Siren output can be programmed for constant or pulsed
output when the system is triggered.
■ Valet pulse count: The number of presses of the Valet
® switch
required to disarm the security system can be programmed
from 1-5 presses. The default setting is one press.