NewAir AI-200 - Manual (Page 9)

SECTION 6 TROUBLESHOOTING
6.1 PROBLEMS, POSSIBLE CAUSES AND SOLUTIONS
If... Then...
"Add/water" LED light
is on. Lack of water. Press "power" button to stop the unit. Ril up water then restart the unit,
if there is sufficient water, try cleaning the filter.
"Ice" LED light is on.
The Ice basket is full. Gently remove ice from the ice basket.
"Add/water" LED light
and "Ice" LED light are
both flashing.
Ensure that ice tray is in correct position. Basket may be full. Remove ice as it may be
blocking sensor.
Ice-making cycle is
normal but no ice is made.
Refrigerant liquid has leakage or pipe is the cooling system is
blocked. Verify by a qualified technician.
Ice cubes are too small
The ambient temperature or the water temperature is too high. Select large size of ice
by pressing “setecr button.