1 unpacking your ice maker, 2 electrical shock hazards – NewAir AI-200 User Manual

Page 6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SECTION 4 GETTING YOUR ICE MAKER READY FOR USE

4.1 UNPACKING YOUR ICE MAKER

1. Remove the Ice Maker out of the box. Throw away all plastic bags. Do not throw the box away.

Keep it at a proper place. You may need it for future storage.

2. Check the parts. There should be total 3 main parts in the package: Ice Maker, ice basket and

ice scoop.

3. Remove all the tape in the unit.

4. Use lukewarm water and soft cloth to clean the interior of the Ice Maker, the ice basket and the

ice scoop.

5. Place your Ice Maker away from direct sunlight and other source of heat such as a stove, furnace

and/or radiator.

4.2 ELECTRICAL SHOCK HAZARDS

Electrical Shock Hazard

Rug into a grounded outlet.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or

electrical shock.

This appliance requires a standard 115V. 60Hz electrical outlet.

Check with a qualified electrician if you are not sure if the Ice Maker is grounded.

Note; Improper use of the grounded plug can result in the risk of electrical shock.

Do not use damaged power cord.