Denon TU-1500AE User Manual
Page 14
Operation
9
ENGLISH
ENGLISH
Auto tuning (FM/AM)
3
Press the
TUNING
•
•, ª
ª
button.
• Auto tuning starts.
• Press the TUNING
•
•
button to automatically switch to
higher frequencies, the TUNING
ª
ª
button to
automatically switch to lower frequencies.
1
Press the
BAND
button to select “FM” or
“AM”.
2
Press the
AUTO/MANU
button to set “AUTO”.
• When the auto tuning mode is set, “AUTO” appears
to the right of the frequency on the display.
• The TUNED indicator lights and tuning stops when a
frequency whose strength is at or above a specific level is
tuned in.
• The STEREO indicator lights when a stereo broadcast is
received on the FM band.
Manual tuning (FM/AM)
1
Press the
BAND
button to select “FM” or
“AM”.
2
Press the
AUTO/MANU
button to set the
manual tuning mode.
• When the manual tuning mode is set, the word
“AUTO” shown to the right of the frequency on the
display turns off.
3
Press the
TUNING
•
•, ª
ª
button.
• Press and hold in the TUNING
•
•
button to move to
higher frequencies, the TUNING
ª
ª
button to move to
lower frequencies.
• Use the manual tuning mode to tune in stations whose
signal is too weak to tune in using the auto tuning mode.
• In the manual tuning mode, the signals are forcibly set to
monaural, and the STEREO indicator does not light even when
receiving stereo broadcasts on the FM band.
SHIFT
BAND
TUNING
PRESET
CHANNEL
MEMORY
AUTO/MANU
TUNED
BAND
MENU
STEREO
TUNING/PRESET
ENGLISH