Denon TU-1500AE - Manual (Page 10)

ENGLISH
ENGLISH ENGLISH
5
Getting Started
q
o
i
w
e
r
t
y
u
Remote control unit
q
POWER button
Press this button to switch from the standby mode to the
operating mode. (
page 8, 16)
w
CHANNEL buttons (1 ~ 10)
Use these when presenting and recalling stations. Also
use these with the SHIFT and MEMORY buttons to use a
total of 100 preset channels, A (1 ~ 10), B (1 ~ 10), ... J (1
~ 10). (
page 10)
e
MEMORY button
Frequencies and station names can be stored in the
memory. When this button is pressed, the “MEMO” and
“CH” indicator on the display flashes for 10 seconds. Use
the SHIFT and the CHANNEL buttons during this time to
designate the desired preset channel. (
page 10)
r
DISPLAY button
This button is used to select the display mode. ( page
11, 15)
t
PRESET buttons
This button is used to select radio presets. ( page 10)
y
SHIFT button
Use this button to select the memory blocks, A (1 ~ 10), B
(1 ~ 10), ... J (1 ~ 10). (
page 10)
u
AUTO/MANU button
Use this button to select the auto tuning mode or manual
tuning mode.
In the auto tuning mode, press the TUNING button, the
automatic searching begins, them stops when a station is
tuned in, In the manual tuning mode, press the TUNING
button, the frequency changes continuously. (
page 9)
i
BAND button
Select FM or AM. ( page 8, 9, 16)
o
TUNING buttons
Use these to change the received frequency to a higher
frequency (•) or a lower frequency (ª). (
page 9)