Select the temperature – AEG 2200 I W-D User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Wash code symbols
The familiar wash code symbols
which are found on the care labels in
most clothes will gradually disappear
and a new set of codes will be
introduced. This change Is due to
changes in fabrics and detergents
and because people are tending to
use fewer programmes and mix
fabrics in one load. The change will
bring the codes into line with the
labelling used in the rest of Europe.
Old Symbol New Symbol
Wash Action Fabric
Ш
Normal (Maximum) White Cotton or Linen without
Special Finishes
yJLé
\Ш
Ш7
Normal (Maximum) Cotton, Linen or Viscose without
Special Finishes
Colourfast at 60° C.
vSUé
No longer used. White Nylon, Polyester/Cotton mixtures now included in
yJLy
\Ш
\Ш
Reduced (Medium) Nylon, Polyester/Cotton, Viscose
with Special Finishes:.
Cotton/Acrylic Mix.
\ш
Normal (Maximum) Cotton, Linen or Viscose
Colourfast at 40°C but not 60°C.
ti/
Ш
Reduced (Medium) Acrylics, Acetate, Triacetate, Wool
mixes, Polyester/wool blends.
wZw
\40¥
Much Reduced Wool, wool mixes. Silks.
(Minimum)
\Ш
No longer used. Silk now included in
printed acetate included in .
я
\Ш
No longer used.
The new symbols have been used on the Programme Guide of this machine,
and are listed in the Programme Charts on page 19 and 20.
The new wash symbols will also appear on the side of Washing Powder
packets.
18
Washing 2 kg of synthetic fabrics at 40°C
Measure out the additives
Select the temperature
Turn the adjustable thermostat dial to
Pour the softener, if required, into the 40®c.
compartment marked ^ ; do not
exceed the MAX level.
5
Close the drawer gently.
programme
Turn the programme dial clockwise
until number 10 on the dial coincides
with the grey dot.
27