Button c – AEG MICROMAT 135 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

CQ
O
CO
05
■>*».
CO
o
N.
CO
CO
UJ
D
CO
o
5
As soon as you plug my plug into the socket, my
display
flash
es.
1. Press
button
+/- for setting the hours. Press
button
© and
set the minutes using the +1-
buttons.
Then press
button
0
again. The appliance is ready to operate!
2. By pressing
button
© twice you can delete the time of day
set and enter a new one (as described above under step
1.).
3. Press
button
©. Hold the +/-
button
down until the time you
wish to set on the timer appears in the
display
(maximum set
ting 99 minutes).
4. Press
button
and P 9 appears in the display, if you press
the -
button,
P 0 will appear in the display. The short time
symbol 0 starts to flash.
5. Press
start button
The time you have set appears in the
display, counting down in seconds.
6. When the timer has finished running it gives an acoustic sig
nal, which you can switch off by pressing
button C
• The time
of day appears in the
display.
7. In general, after wrong entries the
letter E
appears in the dis
play. Correction by pressing
button
C
• Then you can enter
new settings.
Set time
of day
Hours/
Minutes
Correcting
time of day
Timer
Starting
the timer
What you
should
also know
13