Dual XML8150 - Manual (Page 10)

10
XML8150 OPERATION
Display
Seek Tuning
Manual Tuning
Scan Tuning
Band
Storing and Recalling
Station Presets
When using the XML8150 without the optional HDM90, press
DISP to toggle the display between the following options:
Press TUNE nn or TUNE ll for more than one second
to seek the next strong station.
Press TUNE
nn
or TUNE
ll
momentarily to move radio
frequency up or down one step at a time. Press and hold to
advance quickly.
Press SCAN on the remote control momentarily to preview
strong stations on the current band, pausing for five
seconds at each. Press SCAN on the remote control again
to cancel.
Press BAND to select between FM1, FM2, FM3, AM1 and
AM2 bands. Up to six presets can be programmed for each
band.
Up to 18 FM stations and 12 AM stations can be stored in
memory. To store a station, select the desired band and
station. Press and hold the desired preset button (1-6) for
more than two seconds. When stored, the preset number
will appear in the display. The station can be recalled by
pressing the corresponding preset button.
AM/FM Tuner Operation
(LINE 1) FREQUENCY FREQUENCY
CLOCK BAND/PRESET (LINE 2)