Digital Spectrum NV-800 User Manual
Page 8
8
5.7
Inserting Other Types of Cards (SD/MMC/XD/MS/MS )
1. Position the SD/MMC/XD/MS/MS cards so that the pin hole connections are
facing the MMC flash memory card slot. Place the card with the label side up.
2. Slide the card gently into the slot until it touches the bottom.
5.8
Removing a Memory Card
To remove a memory card, gently pull the card out of the slot
.
6.
Replacing Remote Control Battery
1- Remove the battery compartment by pulling the cover in the direction of the arrow.
2- Remove the battery
3 -Insert the replacement battery must follow the correct polarity (+/-).