Digital Spectrum NV-800 - Manual (Page 15)

15
8.16 Auto Start
You can set the AUTO START in “ON” or “OFF” modes.
Press ► button and then use ▲/▼ buttons to select the
“ON” or “OFF” modes. Press “ENTER” button to enter.
8.17 LCD Setup
In LCD SETUP menu, use ▲/▼ buttons to select “LCD
SETUP”. Use “ENTER” button to enter “LCD SETUP”
submenu. LCD SETUP enables you to configure settings
such as brightness, contrast, saturation, hue & backlight.
8.18 Brightness
You can set the BRIGHT mode in level 1 to level 6.
Press ► button and then use ▲/▼ buttons to select the
level desired. Press “ENTER” button to enter.
8.19 Contrast
You can set the CONTRAST mode in level 1 to level 6.
Press ► button and then use ▲/▼ buttons to select the
level desired. Press “ENTER” button to enter.
8.20 Backlight
You can set the BACKLIGHT mode in level 1 to level 6.
Press ► button and then use ▲/▼ buttons to select the
level desired. Press “ENTER” button to enter.