Dacor EPICURE EHR42 - Manual (Page 8)

6
Care and Maintenance
Maintenance
Light bulb Replacement
WARNING
To prevent electric shock turn off power at the fuse or •
junction box before replacing the light bulb.
To avoid personal injury, make sure the cooktop
•
or range, the hood and the light are cool before
changing the light bulb.
Light bulb replacement is considered to be a hom-
eowner maintenance operation. If all of the lights do
not work, before replacing any bulbs, check to make
sure power is on at the circuit breaker or fuse box.
Replace the light bulbs only with Dacor Part No.
700975. Halogen Bulb Replacement Kit consist of
a single bulb and suction cup, available from any
authorized Dacor parts dealer.
To replace the light bulb:
Remove the right filter and turn off the main power 1.
switch.
Gently push the suction cup on the light replace-
2.
ment tool A (provided with you range hood)
onto the lens of the light bulb B .
Turn the tool counter-clockwise until the bulb 3.
comes loose.
Remove the tool from the bulb and put it on the
4.
lens of the replacement bulb.
Screw the new bulb into the light fixture clockwise 5.
until it is tight. Turn on power at the fuse or junc-
tion box. Turn on the main power switch and touch
the light key to make sure it is working.
Replace the filter.
6.
Replacement Parts
Dacor Part
Number
Description
700975 Halogen bulb replacement kit
101617 Filter
Product Specifications*
Total Connected
Load
120 Vac, 60 Hz, 9 Amp. Max.
(10 Amp. max surge)
Filters Mesh type, dishwasher safe
Lights 120 Vac, 60 Hz., 75 Watt
* Specifications subject to change without notice
2
3
1
b
A