Denon AVR-2308 User Manual

Page 73

Get
ting Star

ted

Connections

Set
up

Pla
ybac

k
Remot

e Contr

Multi-Zone

Inf
or

mation

ENGLISH

Symptom

Cause

Countermeasure

Page

No sound is
produced from
center speaker.

• You are playing a monaural

source (TV, AM radio broadcast,
etc.) in the STANDARD mode.

• The mode is set to something

other than “STANDARD”.

No sound
is produced
from surround
speakers.

• The surround mode is set to

“STEREO”, “DIRECT” or “PURE
DIRECT”.

• Set to a surround playback

mode.

No sound is
produced from
surround back
speaker.

• The surround back speaker’s

power amplifier is assigned to a
different channel.

• Surround back speaker setting is

set to “None”.

• Surround mode not set to a mode

for 6.1- or 7.1-channel playback.

• Check the setting and change it

as necessary.

• Set to something other than

“None”.

• Select a surround playback

mode.

No sound is
produced from
subwoofer.

• Subwoofer’s power not turned

on.

• The “Subwoofer” setting at

“Speaker Configuration” is set to
“No”.

• The subwoofer is not properly

connected.

• The subwoofer’s volume is

turned off.

• Turn on the subwoofer’s power.

• Set to “Yes”.

• Check the connections.

• Adjust the subwoofer’s volume

to an appropriate level.

–

No test tones are
produced when
remote control
unit’s TEST button
is pressed.

• Surround mode not set to

“STANDARD”.

• Set to the STANDARD mode.

DTS sound is not
output.

• DVD player’s audio output setting

is not set to bitstream.

• DVD player is not compatible

with DTS sound playback.

• The AVR-2308’s “Decode Mode”

setting is set to “PCM”.

• Set the DVD player. For details,

refer to the DVD player’s
operating instructions.

• Use a DTS-compatible player.

• Set to the “Auto” or “DTS”

mode.

–

HDMI audio
signals are not
output from
speakers.

• The “Manual Setup” – “HDMI

Setup” – “HDMI Audio Setup”
– “HDMI Audio Out” setting is
set to “TV”.

• Set to “AMP”.

Symptom

Cause

Countermeasure

Page

No sound is
output from
the monitor
connected
with HDMI
connections.

• The “Manual Setup” – “HDMI

Setup” – “HDMI Audio Setup”
– “HDMI Audio Out” setting is
set to “AMP”.

• Set to “TV”.

AudioH

Symptom

Cause

Countermeasure

Page

No picture
appears.

• The connections between the

AVR-2308 and monitor are
faulty.

• The monitor’s input setting is

wrong.

• PURE DIRECT mode is set.
• The player is connected using the

component input connectors, the
monitor is connected using the
video (yellow) or S-Video output
connectors.

• Check the connections.

• Set properly.

• Cancel the PURE DIRECT mode.
• High definition (1080i/720p) and

progressive (480p/576p) video
signals are not down-converted.
Set the player to interlace
(480i/576i) signals.

11 ~ 19

–

No picture
appears
with HDMI
connections.

• The connections to the HDMI

connectors are faulty.

• HDMI input setting is improper.
• The monitor is not compatible

with

protection

(HDCP).

• The HDMI format of the player

and monitor do not match.

• Check the connections.

• Check the HDMI input setting.
• Connect a monitor that is

compatible

with

protection (HDCP).

• Match the HDMI format of the

player and monitor.

Picture cannot be
recorded.

• Input source does not match

recorder’s video connection
connector (video or S-Video).

• The video conversion function

does not work for the REC
OUT connectors. Match the
input source and recorder
connections.

DVDs cannot be
copied on a VCR.

–

• This is not a malfunction. Most

movie software includes copy
prevention signals and cannot be
copied.

–

VideoH

Symptom

Cause

Countermeasure

Page

iPod cannot be
played.

• The input source assigned to

“iPod dock” is not selected.

• Cable is not properly connected.
• Control Dock for iPod’s AC

adapter is not connected to
power outlet.

•

Switch to the input source
assigned at “iPod dock”.

• Reconnect.
• Plug the Control Dock for iPod’s

AC adapter into a power outlet.

–

iPodH

oubleshooting