Ducati 848 - Manual (Page 80)

79
E
Checking the chain tension
(fig. 63)
Important
Have the chain tensioned at a Ducati Dealer or
Authorized Workshop.
Chain tensioning (on sidestand): hold a rule half way along the
bottom run of the chain, push down on the chain and adjust
the tension until the distance between the aluminium of the
swingarm and the centre of the chain pin is 31 to 33 mm.
Warning
The tensioner lock nuts (1) must be tightened correctly
to ensure rider safety.
Important
An incorrectly tensioned chain will cause the rapid
wear of transmission parts.
Lubricating the drive chain
The chain fitted on your motorcycle has O-rings that keep
dirt out of and lubricant inside the sliding parts.
So as not to damage these seals when cleaning the chain,
use special solvents and avoid aggressive washing with
high-pressure steam cleaners.
After cleaning, blow the chain dry with compressed air or
wipe with an absorbent material, then lubricate each link
with SHELL Advance Chain or Advance Teflon Chain.
Important
Using non-specific lubricants may cause severe
damage to the chain and the front and rear sprocket.
.
fig. 63
31 to 33 mm