Zanussi ZHP 610 W - Manual (Page 4)

Position 3 = top speed, should be selected when trying or cooking food with strong odours, even for
a long period.
A microswitch operated by the movement of the visor controls the functioning of the
appliance in the previously selected conditions.
3 - MAINTENANCE
Regular maintenance and cleaning will ensure good performance and reliability, while extending the
working life of the hood. Special attentions should be paid to the grease filters and to the charcoal
filters when the hood is used in the recirculation mode,
3.1 - Metal grease tillers
1 - Cleaning
The metal grease filter should be cleaned every two months with normal usage and can be cleaned
in a dishwasher or by hand using a mild detergent or liquid soap.
2 - Replacement
a - Open the sliding visor.
b - Open the metal grille pu.shing the knobs towards the centre while pulling downwards,
c - Remove the wire clips and replace the synthetic fibre filter.
3.2 - Synthetic fibre filter
1 - This type of filter is printed with red dots. When the filter becomes saturated the red colour of the
dots will spread over the whole surface of the filter. At this point the filter has to be replaced.
The saturated filter cannot be cleaned or regenerated.
2 - Replacement
a - Open the sliding visor,
b * Open the metal grille pu-shing the knobs towards the centre while pulling downwards,
c - Remove the wire clips and replace the synthetic fibre filter,
d - Close the metal grille.
3.3 - Charcoal filters
1 - Functioning
In the recycling mode the charcoal filters absorb smell and odours. The charcoal filter cannot be
washed or regenerated and should be replaced every 2 months or more frequently if the hood is used
consistently.
2 - Replacement
a - Open the sliding visor.
b - Open the metal grille pushing the knobs towards the centre while pulling downwards,
c - Replace the charcoal filters by unscrewing the fixing knobs,
d - Close the metal grille.
ATTENTION - There could be a possible fire hazard if the filters are not replaced according
to these instructions.
3.4 - Lighting
a * One or two 40W lamps ensure the worktop lighting. These lamps can be reached by removing the
glass visor.
b ' Should the two lamps fail to work, open the metal grille and ensure they are correctly screwed into
the holder.
c - When changing the lamp, an identical replacement must be fitted to ensure the safe working of
the cooker hood,
3.5 - Cleaning
When cleaning the hood:
- Never u.se a wet cloth or sponge, or running water;
- Never use thinners or products containing alcohol, as they might damage the paintwork;
- Never use abrasive cleaning materials, in particular when cleaning stainless steel surfaces.
It is recommended to use a damp cloth and mild liquid household cleaner.