SoundMax SM-CDM1036 - Manual (Page 13)

13
Radio operations
Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is
not available in you area, the following service is not available, either.
BAND selection
Press the BND button on the panel or the BAND button on the remote control repeatedly to select the
needed radio band in RADIO mode: FM1, FM2, FM3, FM, WM1, WM2.
Auto/Manual tuning
• Manual tuning: Press the / buttons shortly to select a station downward or upward step by step.
• Automatic tuning: Press the / buttons and hold for 2 seconds, the automatic search downward or
upward will start. It will play when finds the station.
Storing stations
You can store up to a total of 30 radio stations in the memory (18 FM, 12 AM), manually or automatically.
To store a station:
• Select a band (if needed).
• Select a station.
• Hold a number button (1-6/М1-М6) which you want store the station for at least 2 seconds.
To recall a station:
• Select a band (if needed).
• Press a number button (1-6/М1-М6) briefly to recall the stored station.
Scanning stations
Select a band. Press the SCAN button to scan all stations stored in the memory of the current band and stay
on each memorized station for about 10 seconds. To stop preset scan, press it again.
Auto memorizing stations
Press and hold the AMS button for more than 3 seconds to activate automatically memory storing function.
The radio automatically selects a station and has it stored in any of the number buttons.
Note: The unit can store up to 6 stations for each band.