Draytek VigorPro 5500 Series User Manual
Page 14
VigorPro5500 Series User’s Guide
6
Interface
Description
RST
(Factory Reset)
Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press the hole and keep for
more than 5 seconds. When you see the ACT LED begins to blink rapidly than
usual, release the button. Then the router will restart with the factory default
configuration.
ISDN
Connect for NT1 (or NT1+) box provided by ISDN service provider.
WAN(1/2)
Connecter for remote networked devices.
LAN/Monitor
Connecter for local networked devices.
LAN (1- 4)
Connecter for local networked devices.
Connecter for a power cord with 100-240VAC (inlet).
Power Switch. “1” is ON; “0” is OFF.