Stacked installation – ASKO 7003 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
^ Stacked installation
The dryer can be mounted on top of
any ASKO matching washing machine.
Use the mounts supplied with the
machine.
How to install the tumble dryer
on top o f a washing machine
These parts are supplied with the tumble dryer:
Two metal brackets for
securing the tumble dryer Two plastic cups
Program knob and plastic scaU
for reading off programmer
positions from below
CD Remove the screws shown
from the back of the washing
machine, and use them to
secure the two brackets.
Front edge of the
detergent compartment
Side of the
top panel
Fix the plastic cups which
locate the front feet of the
tumble dryer on top of the
washing machine. This is
important, as they ensure that
the machine is safely poshioned
on top of the washing
machine
Break off tab A on the plastic
cup to be fitted on the right-
hand side of the machine, and
tab B from the cup to be fit
ted on the left-hand side of
the machine. Remove the pro
tective paper from the self-
adhesive surface beneath the
cups. Taking care not to press
the exposed adhesive surface
against the top of the washing
machine, so that the cups
fasten before being properly
located, position the cups so
that the tabs indicated by the
arrows (see right-hand drawing)
locate the cup exactly with
respect to the front and sides
of the machine When the cups
are properly positioned as
shown, press them firmly down
on to the top of the washing
machine. Finish by breaking off
the plastic tabs, which have
now served their purpose.
It can be difficult to see the
marks on the program knob
when the tumble dryer is
mounted on top of a washing
machine. Replace the knob with
l^a^different knob and scale
supplied with the tumble dryer,
and intended for reading from
below.
a) Pull off the
programm knob
b) Press the scale ring into
position so that the lugs
/ on the back of it locate
/ in the holes in the panel
c) Press the new program
knob into position
Lift the tumble dryer into posi-
^ tion, raise the front edge and
push the machine backwards
until it engages with the
brackets.
Lower the front of the dryer,
making sure that its feet drop
into the_glastic cups.
Tumble dryer
Washing machine