AEG VAMPYR 731I - Manual (Page 11)

Changing the mlcro-fRter/uHra-mlao-flHer
Switch off and piill out the mains plug before changing the micro-filter.
Changing the micro-filter/ultra-micro-fitter is necessary:
For appliancee with no micro-fitter indicator - when the dustbag lull indicator
lights up,evenwhenaclean dustbag has been inserted,w№ the appliance switched
on. hold the head/nozzle upwards or off the floor,if the light remains on,this indicates
the micro-fitter should be changed. We recommend changing the micro-filter with
every fifth bag.
For appliances with micro^Her hidicator - when this comes on.
The cassette can be opened by pressing the micro-
filter button. Take out the cassette inthe direction of
the arrow and empty the micro-filter over a dustbin
- this avoids you touching the dirty micro-filler.
Insert the new micro-filter into the cassette as
shown in the illustration, push it back in parallel to
the floor, and snap the cover shut.
Motor protection filter
The motor protection filter is a permanent filter and does not have to be changed
regularly. Exception: if it has been damaged. Sea “What to do if...”.
Cleaning
The cleaner housing and dusfbag compartment can be cleaned with a damp cloth
and then wiped dry with asoft cloth. Do not use any abrasives or solvents. The under­
side of the cleaner head can be cleaned with the crevice nozzle from time to time.
25