Directed Video DV1700 - Manual (Page 21)

21
© 2003 Directed Electronics, Inc.
WIRING CONNECTIONS
1. POWER CONNECTOR - The RED power wire
must be connected to a wire that has (+) 12
volts when the key is in the accessory posi-
tion. The BLACK ground wire must be con-
nected to a metal chassis point, preferably
scraped sheet metal. The YELLOW wire must
be connected to a constant 12 volt source.
2. EXTERNAL REMOTE CONTROL CONNECTOR -
Insert the 1/8" pin plug for the External
Remote Sensor eye into this socket.
3. VIDEO OUT - Connect the YELLOW
Composite Video RCA cable to this jack.
4. AUDIO OUT - Connect the system L/R
stereo Audio RCA cables to these jacks.
1
2 3
4
N83102 1-03.qxd 5/6/2003 8:33 AM Page 21