Electrical connection – Avanti 18EYC User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

water(stove. heater, radiator, sink, pool, etc.). Direct sunlight may
affect the acrylic coating and heat sources may increase electrical
consumption. All electrical appliances should be kept away from water
to prevent possibility of electrical shock. Avoid humid places and
extreme cold ambient temperature, as this will affect the cooling
efficiency of your appliance.
Avoid locating the appliance in moist areas. Too much moisture in the
air will cause frost to form quickly on the evaporator requiring more
frequent defrosting of the refrigerator.
Plug the appliance into an exclusive properly installed grounded wall
outlet. Do not under any circumstances cut or remove the third
(ground) prong from the power cord. Any questions concerning
power and or grounding should be directed toward a certified
electrician or an authorized Avanti Products service center.
^ Electrical Connection
Warning
Improper use of the grounded plug can result in the risk of electrical
shock. If the power cord is damaged have it replaced by an authorized
Avanti products service center.
This appliance should be properly grounded for your safety. The power cord
of this appliance is equipped with a three-prong plug which mates with
standard three prong wall outlets to minimize the possibility of electrica!
shock.
Do not under any circumstances cut or remove the third grounded prong
from the power cord supplied.
Use of extension cords is not recommended.
This appliance requires a standard 115/120 volt, 60Hz electrical outlet with
three-prong ground. The cord should be secured behind the appliance and
not left exposed or dangling to prevent accidental injury.
-
6
-