Using the cleaning head and accessory nozzles – AEG VAMPYR 825I User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Mains connection/Rex rewind
The mains cable is located in the cable compart
ment. Press the foot button for the cable, and pull
the cable out. Insert the plug into the socket.
At the end of vacuuming switch off and pull the plug
out of the socket. Press the flex rewind button and
the cable rewinds automatically.
Using the cleaning head and accessory nozzles
The cleaning head and nozzles are attached to the suction tube by pushing and
twisting, and taken apart again by twisting and pulling.
Using the floor cleaning head
a
C5
For care of carpets and hard floors, the cleaning
head can be adjusted to suit the type of floor with
your foot;
for carpets
Symbol for carpet, brush withdrawn
for hard floors
Symbol for hard floor, brush extended
For other optinal extra floor cleaning heads see
Special Accessories.
a
O
Accessory Nozzles - Furniture Brush, Crevice and Upholstery Nozzles
The
integrated
accessories
compartment
contains
3 nozzles - afurniture brush, a crevice nozzle and a
upholstery
nozzle.
Open
the
compartment
by
pressing lightly on the cover as shown in the illus
tration.
21