Fitting the suction hose and suction tube together – AEG VAMPYR 825I User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The hose, tubes and accessories can be fitted together by pushing and twisting, and
taken apart by twisting and pulling.
Assembling the vacuum-cleaner ready for use
Fitting the suction hose and suction tube together
Push the tube end of the hose firmly into the suction
tube.
Adjusting the teiescopic tube
Slide the button on the tube downwards and set the
tube at the most convenient length for working with.
When the button is released the telescopic tube is
engaged in the position you require.
Connecting the suction hose
Insert the hose holder into the suction opening.
When the hose is to be disconnected from the
appliance, press the release button and pull the
hose holder out of the suction opening.
O
20