Aiwa CT-ZI09 - Manual (Page 9)

Activating the timer
BAND TAPE
TAPE PLAYBACK
1
With the unit on, press MY iNFO.
The “MY INFO” indicator lights up and the
timer is activated.
To cancel the timer
Press MY INFO again so that the “MY INFO”
indicator disappears.
To check the setting
With the unit off, press MY INFO.
The turn-on time, followed by the radio frequency
and the turn-off time, appears in the display
window each for 1 second, then the unit turns off.
Notes
• Even if the unit is in a mode other than Radio
mode, the unit switches to Radio mode and
tunes in the preset radio program at the preset
time automatically.
• Even If you are listening to a radio program with
this function, pressing the foiiowing buttons
switches the unit to other mode:
— Pressing BAND changes the unit to Radio
mode.
^— Pressing TAPE changes the unit to Tape
Play mode.
— Pressing CD/MD IN changes the unit to CD/
MD IN mode.
If you switch modes with these buttons, the unit
does not turn off at the turn-off time of the timer.
Insert a cassette to start playback.
If a cassette is already inserted, press TAPE
to start playback.
Playback starts in the direction that the unit
piayed back previousiy.
2
Adjust the volume with +/—.
Press the following buttons to operate tape
transport.
To do this Press this button
Eject the cassette*
0
Change the piayback
side Q] and [Q
simultaneously
Fast-forward either side
of the tape
E
Rewind either side of
the tape
3
Stop fast winding and
resume playback Q or [0 lightly**
When you eject the cassette, the unit switches to
Radio mode.
When a cassette is inserted, @ comes out so that it
can be pressed to eject the cassette.
Do not press m or m all the way. Doing so may
change the direction of tape transport.
continued
ENGLISH
8