Specifications, Cd/md in input, General – Aiwa CT-ZI09 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SPECIFICATIONS
RADIO SECTION
(FM)
Frequency Range. 87.5 MHz-108 MHz
(100-kHz steps)
87.5 MHz-108 MHz
(50-kHz steps)
Usable Sensitivity:
12.7dBf
50 dB Quieting Sensitivity:
17.2 dBf
iF Rejection:
80 dB
Frequency Response: 30 Hz-15,000 Hz
S/N Ratio:
63 dB
Stereo Separation:
35 dB at 1 kHz
Alternate Channel Selectivity:
70 dB
Capture Ratio:
3 dB
(AM)
Frequency Range:
Usable Sensitivity:
530 kHz-1,710 kHz
(10-kHz steps)
522 kHz-1,620 kHz
(9-kHz steps)
30 pV (30 dB)
TAPE SECTION
Tape Speed:
S/N Ratio:
4.8 cm/sec. (1 % ips)
50 dB
Frequency Response: 40 Hz-14,000 Hz
Stereo Separation:
FF/REW Time-
40 dB
190 sec. (C-60)
AUDIO SECTION
Max. Power Output:
35 W X 4 channels
CD/MD IN input
Input sensitivity (load impedance)
CD/MD IN:
500 mV (10 kn)
GENERAL
Power-Supply Voltage:
i44V(llto16V allowable),
DC, negative ground
4£i
Bass ± 10 dB at 100 Hz
Treble ± 10 dB at 10 kHz
Preamp Output Voltage (load impedance):
2.2V(10k£l)
Installation size. 182 (VV) v S3 (H) x
155 (D) mm
(7
'/4
(W)
X
2 Vs (H)
x
6 Vs (D) inches)
• Specifications and external appearance are subject to
change without notice due to product improvement
Load Impedance:
Tone Control-
ENGLISH
1
2