Aiwa CDC-X145 - Manual (Page 7)

To turn the unit off
Press PWR.
Note
The “STEREO” indicator iights up when the tuned-
in station is broadcasting in stereo and the
reception is good.
PRESETTING STATIONS
To preset stations automatically
(auto memory)
1
2
Press PWR to turn the unit on.
Press BAND to select a desired band
from among FM1, FM2, FM3, AM1, and
AM2.
FM 99
1 n c < Ufto
3 Press and hold A.ME for more than 2
seconds to activate the automatic
presetting function.
This unit can store up to 6 stations in memory
for preset station button 1 to 6 with LOCAL
indicator lights up.
If the unit could not search for all of 6 stations,
LOCAL indicator goes off and starts searching
for weaker stations again.
Use this function to automatically preset up to 6
stations each for FM1, FM2, FM3, AMI, and AM2
(up to a total of 30 stations).
•When auto memory is completed, the preset
stations are automatically scanned in order.
• To stop auto memory, press A.ME again.
To check the preset stations (preset scan)
• If you wish to check the preset stations, press
A.ME for less than 2 seconds. The preset stations
stored in memory will be tuned in for 5 seconds
each in order.
• To stop this function, press A.ME again or press
any of the preset station buttons 1 to 6.
continued
ENGLISH
6