Specifications, 2v(10k£2), Specifications and external appearance are – Aiwa CDC-X145 User Manual
Page 13: Improvement
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SPECIFICATIONS
RADIO SECTION
(FM)
Frequency Range:
87.5 MHz-108 MHz
(100-kHz steps)
87.5 MHz-108 MHz
(50-kHz steps)
Usable Sensitivity:
12.7 dBf
50 dB Quieting Sensitivity:
17.2 dBf
IF Rejection;
80 dB
Frequency Response: 30 Hz-15,000 Hz
S/N Ratio:
63 dB
Stereo Separation:
35 dB at 1 kHz
Alternate Channel Selectivity:
70 dB
Capture Ratio:
3 dB
(AM)
Frequency Range:
520 kHz-1,710 kHz
(10-kHz steps)
522 kHz-1,620 kHz
(9-kHz steps)
Usable Sensitivity:
30 pV (30 dB)
CD SECTION
Frequency Response: 17 Hz-20 kHz +0/-3 dB
Dynamic Range:
More than 80 dB
Channel Separation; More than 65 dB
S/N Ratio:
More than 85 dB
Wow/Flutter:
Unmeasurable
AUDIO SECTION
Max. Power Output:
40 W X 4 channels
TAPE IN input
Input sensitivity (load impedance)
TAPE IN:
500 mV (10 kn)
GENERAL
Power-Supply Voltage:
14.4 V (11 to 16 V allowable),
DC, negative ground
4iJ
Bass ± 10 dB at 100 Hz
Treble ± 10 dB at 10 kHz
Preamp Output Voltage (load Impedance):
2.2V(10k£2)
182(W)x53 (H)x 155(D) mm
(7'U (W)
X
2Ve (H)
x
6Ve (D) inches)
Carrying case (1)
Load Impedance:
Tone Control:
Installation size:
Accessory supplied:
• Specifications and external appearance are
subject to change without notice due to product
improvement.
ENGLISH
12