Avanti DER240W - Manual (Page 16)

CARE & MAINTENANCE
Figure 20a REMOVING THE OVEN DOOR
Type A
To facilitate oven cleaning, it is possible to remove the door.
Please follow the instructions carefully:
- Open the door completely.
- Push down the lever “L" and, keeping it in this position, slowly close the door in order
to block the hinge (fig. 20a).
- Grip the door (as indicated in fig. 20b) and, while closing it, release the two hinges
as shown in fig. 20c.
- Rest the door on a soft surface.
DOOR ASSEMBLY
- Grip the door with your hands placed
near the hinges and raise the levers
“H” with your forefingers (fig. 20c)
- Insert the hinges in their position until
levers “H" are hooked.
- Open the door completely to obtain
the release of levers “L".
Figure 21a
Figure 21b
REMOVING THE OVEN DOOR
Type B
The oven door can easily be removed as follows:
- Open the door to the full extent (fig. 21a).
- Attach the retaining rings to the hooks on the left and right hinges (fig. 21b).
■” Hold the door as shown in fig. 21.
- Gently close the door and withdraw the lower hinge pins from their location (fig. 21c).
- Withdraw the upper hinge pins from their location (fig. 21 d),
- Rest the door on a soft surface.
- To replace the door, repeat the above steps in reverse order.
Figure 21c Figure 21 d