Avanti DER240W - Manual (Page 15)

CARE & MAINTENANCE
Figure 16
VITROCERAMIC SURFACE
Before cleaning the top, make sure that it is switched off.
Remove any encrustation using a special scraper which can be purchased separately
(fig. 16).
Remove dust using a damp cloth.
Detergents can be used as long as they are not abrasive or corrosive.
All residues of detergent must be eliminated with a damp cloth.
Keep all objects that could be melted by the heat away from the top: plastic objects,
aluminium foil, sugar or sugary products.
If an object melts on the top, remove immediately (while the top is still hot) using a
special scraper to avoid permanent damage to the pyroceram surface.
Avoid using knives and pointed objects as they could damage the surface of the top.
Also avoid using abrasive sponges or wire wool which can permanently scratch the
pyroceram surface.
ATTENTION: MOST IMPORTANT!
If cleaning the glass ceramic hob using a special scraper tool take extra care to avoid
damaging to tiie sea) at the edges of die glass ceramic surface.
; bo riot, use ;dteani jet, cleanerdi^^ii:-
bècaùseithei h u m i d i t y :
pirifiltrat^iritóithèiiappiiaricéjn^
Ì^:rt;_dangeròu's..>”
OVEN SHELF INSTALLATION AND REMOVAL
The oven shelves are provided with a security block to prevent accidental extraction.
They must be inserted operating as per figure 17.
To pull them out remove shelf in the inverse order.
Keep attention to insert the shelves correctly (see side figure).
OVEN DOOR
The internal glass of the oven door can be easily removed for cleaning by unscrewing
the two lateral fixing screws (fig. 18).
REMOVABLE STORAGE DRAWER
The drawer (fig. 19) comes out like a normal drawer.
To remove the drawer open and lift it.
Figure 18
H^riM№iscratc№:the|^^^
"=;^сий|пд or sH
Figure 17
Do not store flammable matérial in the oven or in the bottom drawer.
15