DXG Technology DXG-538 - Manual (Page 13)

12
Note:
Before using, please insert your SD memory card into the memory card slot on
bottom of the camera. If the
d is full or contains other data, you can access
Format in “Set
the
up mode”
car
using the Mode Selector button to format your
●
to be the primary storage media.
※ or removing the
※ ’s y i
memory card.
The digital camera has a built-in memory of 32MB. When a memory card is
inserted into the camera, the camera will take it
※
The camera accepts only SD or MMC memory cards.
When using SD memory card, please switch the camera off before inserting
SD memory card.
● Built-in memory and memory card in use display on the camera.
When the camera built-in memor s in use, will be displayed. When the built-in
memory is full, will flash; will be displayed i e built-in memory is empty.
When the camera’s SD MMC memor rd is in use,
f th
※ or y ca will be displayed. When the
memory card is full, will flash; will be displayed if the memory card is empty.
Removing the SD card while taking or view ● ing your images can damage the SD
●
sive force when inserting the memory card to prevent causing
● ft and dry cloth to
● D is new, please use the camera’s Format feature to format it before
using.
● Slide the power cover sideways as shown in the picture to switch the camera on.
card and cause the camera to malfunction.
● This product accepts SD memory cards of sizes between 32MB to 1GB.
The memory card will not slide fully into its slot if it is incorrectly inserted. Do
not apply exces
damage.
If the camera is unable to read the memory card, please use a so
gently wipe the gold contacts on the card, before re-inserting.
If the S
.4 Turning on for the first time 2
● Slide the power cover sideways as shown to switch the camera off. (Next page)