AEG OKO_FAVORIT 3220 User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

* * ■ ' ì ' .............
*
' r i I ■ : ■ i :
* * * i » » : ■ ■
□ The dishes are not dried and have no sparkie
- have you used rinse aid?
- Is there any rinse aid left in the dispenser? (See section “Refilling Rinse Aid
Dispenser”)
□ There are streaks, stripes, milky flecks or blue-shiny deposit on the
glasses and dishes.
- there is too much rinse aid.Set the rinse aid dosage at a lower level.
(See section “Setting Rinse Aid Dosage”)
□ There are dried-on water stains on the glasses and dishes - there is too
little rinse aid. Set the rinse aid dosage higher. (See section “Setting
Rinse Aid Dosage”)
□ Rust stains are visible in the interior of the machine
- the wash area is made of non-corrosive steel. Rust stains in the wash area can be
attributed to external rust. (Rust particles from the water supply, from pots, cut
lery etc.). Remove these flecks with a normal steel cleaner.
~ have you put the right amount of detergent in? (See section “Refilling Dish
washer Detergent")
- Is there still salt in the salt container? (See section “Refilling Salt”)
- Is the water softening unit correctly set up? (See section "Setting Water Soften
ing Unit”)
□ Whistling noise during the dishwashing cycle
- You may possibly need to seek a remedy by using another branded detergent.
The whistling is completely harmless.
O
¥
30