My oven is ready to operate manually again – AEG 840E User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

How to
program:
automatic
switch-off of
my oven
You shouid
aiso be aware
of the
foilowing
78
63
-
Set my heating mode switch to the corresponding symbol and
the oven temperature switch to the neoessary temperature.
-
Press my button B 0, hold it depressed, and enterthe required
duration with knob E When my button Bis released, the time
of day reappears in display F.
-
The red triangles above the symbols Q and'[§ show until the
duration has elapsed.
My oven switches immediately on and automatically off after
the elapsed duration.
At the end, an audible signal sounds for around two minutes.
You can prematurely cancel it by pressing my button B
When the roasting or baking process has ended, set my heating
mode switch to 0 and the oven temperature switch to the Off
position.
- The red triangle above button D[fl]flashes. It is cancelled by pres
sing my button D.
My oven is ready to operate manually again.
You can request the remaining duration and end at any time dur
ing the automatic sequence. To do this, press either my button B 0
or C 0.
If you want to cancel automatic operation, press my button D 0, and
set my heating mode and oven temperature switches to the 0 and
Off position respectively.