AEG 840E - Manual (Page 17)

After switching on a hob, you will hear me buzz. This is a special fea­
ture of my radiant heating system not implying any impairment of
function!
Never place food in aluminium foil or plastic containers on my hot
cooking area. That has an extremely detrimental effect on the glass-
ceramic cooking surfacel
When starting to fry, set the switch referring to the hob to 9 until the
fat is hot. Then place the food to be fried i n the pan and tu rn the switch
back to 6 or higher as necessary.
When starting to boil, set the switch referring to the hob to 9. To sim­
mer, turn the switch back to 1 to 5 as necessary.
Intermediate settings, e. g. 3* (or *2 only with electronic indicator),
are at all times possible.
When starting to boil within the 1-8 region (not on setting 9), my
automatic system relieves you of the needto switchoverto my sim­
mering region if you turn the knob clockwise beyond setting 9 as far
as letter A (the pilot lamp monitoring the boiling-up sequence
comes on - if available) and then set it back to the required simmer­
ing region (1-8).
My automatic system selects for you the boiling-up time at the
start of cooking and then itself switches back the power corre­
sponding to the simmering setting selected.
The automatic system can be cancelled by turning to 0.
You can also use my automatic hobs withoutthe automatic system.
You should then switch me on only as far as setting 9.
The following table shows you examples of the suitability of switch
settings 1 to 9.
Operating
the hob
- Important
note before
starting
- Boiling/
frying on the
automatic hob
69