AEG 860 D User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2.
Remove old active carbon filters
(always 2)
by loosening the
knurled screw in the centre.
3.
Clean my Internal housing only with warm washing-up liquid
suds
(never use any abrasive cleaners, brushes, or scouring
agents).
4. Insert
2 new active carbon filters KL 600.
The active carbon
filter is arranged before the motor housing and is mounted
with the knurled screw.
5. Re-insert the fuses and reconnect the appliance.
Your fume extractor hood is now ready to operate in return air
mode again!
45
This manual is related to the following products: