Apollo Radius User Manual

Page 48

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

3. Fasten the shoe fixing nut while holding the shoe against the rim.

5mm Allen Key

4. Thread the inner cable through the inner cable lead. When a clearance of 1mm

between each brake pad and the rim is achieved, secure the cable fixing bolt.

5. Alter the spring tension adjustment screws to correct the balance.

Check the brake operation and shoe clearance by fully squeezing the brake lever

repeatedly, (about 10 times). Loosen and then re-fasten the cable fixing bolt as per

Step 4 until adjustment is correct. Make any fine alterations via the adjusting screw

^t tA^ tjr^ke lever.

RAOM0507 Apollo Bicycle Company Pty. Ltd. ABN: 60 001 914 469

Updated 23/05/07