Amerec ASX100 - Manual

Installation, Operation & Maintenance Manual
for Saunatec Water Filtration System
Model: ASX100 ou©
NOTICE TO INSTALLER:
DO NOT DISCARD THIS MANUAL AFTER INSTALLATION. THIS MANUAL CONTAINS IMPORTANT
OPERATION, MAINTENANCE AND PRECAUTIONARY INFORMATION. PLEASE PRESENT THIS MANUAL
TO USER/OPERATOR/OWNER AFTER INSTALLATION.
IT IS STRONGLY ENCOURAGED THAT YOU READ THIS MANUAL BEFORE INSTALLING SYSTEM TO
ENSURE THE BEST POSSIBLE INSTALLATION.
INSTALLATION MUST CONFORM TO ALL LOCAL AND STATE PLUMBING CODES AND REGULATIONS.
CONNECT SYSTEM TO COLD WATER SUPPLY ONLY. WATER TEMP. CAN NOT EXCEED 100“F/28°C.
SYSTEM MUST BE INSTALLED IN AVERTICAL AND UPRIGHT POSITION.
ASX100 SYSTEMS MUST NOT BE USED IN CONJUNCTION WITH POLYPHOSPHATE OR ANY OTHER
SCALE INHIBITOR.
DO NOT INSTALL FILTERS DOWNLINE FROM THEASX100 SYSTEM. ASX100 MUST BE THE LAST FILTER
SYSTEM BEFORE THE EQUIPMENT.
DO NOT USE WITH WATER THAT IS MICROBIOLOGICALLY UNSAFE OR OF UNKNOWN QUALITY
WITHOUT ADEQUATE DISINFECTION BEFORE OR AFTER THE SYSTEM.
NOTICE TO USER/OPERATOR/OWNER:
PLEASE COMPLETE THE PRODUCT REGISTRATION CARD AND MAIL OR FAX TO MANUFAC­
TURER. PLEASE RETAIN THIS MANUAL FOR FUTURE REFERENCE FOR PARTS. MAINTENANCE OR
TROUBLE-SHOOTING.
IT IS RECOMMENDED THAT ALL PERSONNEL RESPONSIBLE FOR OPERATION AND MAINTENANCE
OF THIS PRODUCT READ THE PRECAUTIONS. OPERATION AND MAINTENANCE SECTIONS OF THIS
MANUAL
Introduction
Your new Saunatec Water Filtration System will condition the tap water providing optimum water characteristics for
their specified applications. The result is reduced equipment maintenance requirements, longer equipment life and
improved quality & consistency of your products. Proper system installation and routine filter changes will ensure
years of trouble-free operation and performance.
The ASXlOO System is built with the finest and most advanced materials and each system is quality inspected and
pressure tested prior to shipment. With proper installation and routine maintenance, you will have years of trouble-
free operation.
Please refer to this manual when performing routine filter changes. The instructions make periodic maintenance quick
and easy, and ensure you will receive maximum benefit from your system.
System Specifications
Maximum Pressure: 125psi/8.6bar Maximum Temperature: 100°F/38°C, Min.: 35°F/2°C
inlet/Outiet Connections: 1/2” fnpt Service Row Rate: 1.0 gpm /3.78 Ipm
Capacity: Change ASXlOO Cartridge at least once a year.
4 2 1 1 - 1 6 1 0 3 - 0 7
1
ASXIOOhm 3/2007