Dixon 13089-0601 - Manual (Page 32)

32
OPERATION INSTRUCTIONS
DECK ROLLERS (60” deck):
Purpose: The spring loaded deck rollers located
at the front corners of the 60” mower
deck are designed as an aid to limit turf
scalping when mowing on uneven ground.
Height: Normal height settings as installed at
the factory allows each roller to ride
slightly above the turf. This setting
should prove ideal under most mowing
conditions.
Adjustment: Some mowing applications may require
lowering of each front roller. To lower
the roller, remove the pin, spring,
washers and spacer (P/N 9789) from
the top of roller bracket tube. Remove
roller bracket from tube. Slide spacer
P/N 9789 on roller bracket shaft and
reassemble using washer, spring and
pin at the top.
Lubrication: The use of a penetrating oil or light
grease on the roller bracket shafts
will keep roller moving freely.