Dixon 13089-0601 - Manual (Page 28)

28
OPERATION INSTRUCTIONS
MOWING WITH A MULCHING ATTACHMENT:
Mulching or recycling the grass clippings requires a totally different
mowing approach than would be normal when side discharging or
bagging the grass. There may be instances or conditions where it is
not possible to hide all of the recycled or mulched clippings.
In order to achieve the best results, please read and follow the
mulching tips listed below:
1. Set the engine speed control to the wide open
or full setting.
2. Place the mower deck cut height selector in
either the top or second notch. Never cut more
than 3/4” to 1” off the grass at any one time.
Attempting to cut more grass will result in the
deck plugging and cause the engine to stall.
3. It may be necessary to cut the lawn twice to
achieve acceptable mulching performance
especially on first cuttings or if the lawn is
heavily fertilized.
4. Do Not Attempt To Cut Grass When It Is Wet.
Mulching performance will be very poor under
wet grass conditions.
5. Maintain Sharp Blade(s) Throughout The Cutting
Season. This is very important. Optimal mulching
performance cannot be obtained with a dull or
nicked-up blade.