Using the automatic adjustment feature, Adjusting the position, Operating – Dukane 8776-RJ User Manual

Page 22

Operating

Using the automatic adjustment feature

Press the AUTO button on the remote control.

 For an RGB signal

The vertical position, the horizontal position, the horizontal
phase and the horizontal size will be automatically adjusted.
And the aspect ratio will be automatically set to default. Make sure that the
application window is set to its maximum size prior to attempting to use this
feature. A dark picture may still be incorrectly adjusted. Use a bright picture
when adjusting.

 For a video signal or s-video signal

The video format best suited for the respective input signal will be selected
automatically.
This function is available only when the AUTO mode is selected to the
VIDEO FORMAT item in the INPUT menu

(



33)

. For a component video

signal, the signal type is identified automatically independently of this
function.

 For a video signal, s-video signal or component video signal

The vertical position, horizontal position and aspect ratio will be automatically
set to default.

 For a component video signal

The horizontal phase will be automatically set to default.

● The automatic adjustment operation requires about 10 seconds. Also please

note that it may not function correctly with some input.

Adjusting the position

Press the POSITION button on the remote control.
The “POSITION” indication will appear on the screen.

Use the cursor buttons ▲/▼/◄/► to adjust the picture
position.

When you want to reset the operation, press the RESET button on the remote
control during the operation.

To complete this operation, press the POSITION button again. Even if you don’t
do anything, the dialog will automatically disappear after a few seconds.

● When this function is performed at a video signal, a certain extra such as a line

may appear outside a picture.

HOME

PAGE UP

PAGE DOWN

END

VIDEO

RGB

FREEZE

OFF

MAGNIFY

ASPECT

AUTO

BLANK

MUTE

VOLUME

KEYSTONE

MY BUTTON

POSITION

ESC

ENTER

RESET