Char-Broil 463232011 User Manual

Page 20

*This side UP

Tank heat shield

Inside of cart, insert rear shield tab into left slot on upper of lower back panel.

Attach front shield tabs under front brace and attach right and

Insert left and right grease tray rails into slots

left rails under front brace with three #8x3/8” self-tapping screws, shown B.

Insert front brace under control panel and between cart side panels. Make sure door hinge pins are on the top side and

facing the front. Secure using two 1/4-20x1½” screws, 7mm lock washers, and 7mm flat washers on each side.

NOTE: MAKE SURE THAT THE FRONT BRACE IS MOUNTED IN THE MOST DOWNWARD POSITION WHEN

ASSEMBLED TO CART.

1/4-20x1½”

screw

7mm lock

washer

7mm flat

washer

Door

Hinge Pin

Rear

Front

Tank heat shield

Cart lower back panel

Right rail

Left rail

Front Brace

Right rail

Left rail

#8x3/8”

self-tapping screw

Grease tray opening

beneath grease tray opening in upper back panel, shown A.

for clarity of illustration

Note: some parts omitted

Front brace